iron mold

1. High quality ductile iron castings can be made by sand-lined metal mold process, and castings such as ADI crankshafts, gear wheels, slope wedges and so on have successfully been produced.
   利用铁型覆砂铸造在球铁件生产中的优势，稳定生产高质量的球铁件是可行的。
2. Application Research of Thulium Element in Iron and Steel Smelting and Die& Mold Surface Strengthening
   稀土元素在钢铁冶炼和模具表面强化中的应用研究
3. Using Numeral Simulation to Optimize Casting Method Design of a Heavy Vermicular Iron Steel Ingot Mold
   用数值模拟优化大型蠕铁钢锭模工艺设计
4. Using Resin Sand-Coated Iron Mold to Produce Ductile Iron Brake Disc
   用覆砂铁型铸造工艺生产球铁列车刹车盘
5. This type of cooling device can decrease iron mold temperature effectively and uniformly, lengthen working life of iron mold, and also improve the working environment.
   这种冷却装置可有效地降低铁型温度，铁型冷却均匀，延长使用寿命，改善工作环境。
6. Study of Multi-alloy D-type Graphite Cast Iron Glass Mold
   多元合金化D型石墨铸铁玻璃模具的研究
7. In order to improve the abrasion-resistant on the casting surface, the low-Cr cast iron matrix composite reinforced by WC particles in sand mold was made in the experiment.
   为了提高铸件表面的耐磨性，实验以低铬铸铁为基体，WC颗粒为增强体，制备出颗粒增强表面耐磨复合材料。
8. Cause and Precaution of Shrinkage Defects of Nodular Cast Iron Crankshafts Produced in Sand-coated Metal Mold
   铁模覆砂球墨铸铁曲轴收缩缺陷的产生原因与预防措施
9. Crystal grains of castings by aluminum mold are less than that of castings by iron permanent mold, and mechanical properties are obviously improved.
   经微弧氧化涂层处理的铝质金属型比铁质金属型铸出的铸件组织更细，力学性能明显改善。
10. The enthalpy-change coating consists of some matters as a base material causing endothermic reaction at a certain temperature range, which acts as iron chill when placed on a mold or core surface.
    焓变涂料是以在一定的温度区间内可发生吸热化学反应的物质为基料配制的，将其涂在砂型（芯）表面，可代替常规冷铁。
11. An Investigation Into the Characteristics of Ductile Iron Crankshafts Cast by Metal-backed Shell Mold On Laser Absorptivity of Ductile Iron
    铁型复砂曲轴特性的研究球墨铸铁材料对激光的吸收率
12. Study on the Effect of Iron for the Aluminum Alloy Piston in Permanent Mold
    金属型铸造活塞铝合金中铁的作用研究
13. A Study on Strength of D-type Graphite Iron Cast in Metal Mold
    金属型D型石墨铸铁强度的研究
14. Production of Iron Casting with Film-covering Sand Hot Corebox in place of Shell Mold
    用覆膜砂热芯盒代替壳型工艺生产铸铁件
15. Producing WC Particles Reinforced Gray Cast Iron Matrix Steel Rolled Guiding Board in Sand Mold
    砂型铸造WC颗粒增强灰铸铁基轧钢导位板的研制
16. Property of Low-chromium White Cast Iron Made by Permanent Mold
    金属型低铬白口铸铁的性能
17. Elevation of the Yield of Floating Sealing Rings with Cast Iron in Ceramic Mold Casting
    提高陶瓷型铸造铸铁浮封环合格率的研究
18. Thus the technological instructions of on the spot cast iron analysis of quick-cooling sample ( metal mold) of molten iron is established, the result of which is identical to that of chemical analysis.
    在此基础上建立了快冷却（金属模）试样炉前铸铁分析的工艺规范，经与化学方法对照，其结果吻合较好。
19. Production of High Strength As-cast Automobile Ductile Iron Crankshaft with Sand-liened Metallic Mold
    覆砂金属型生产高强度铸态汽车球铁曲轴
20. The properties and service life analyses for middle and small-sized RE-Mg ductile iron ingot mold
    中小型稀土镁球铁钢锭模的性能及使用寿命分析
21. Effect of Some Factors on Properties of No-alloyed Austempered Ductile Cast Iron at Metal Mold
    金属型非合金化奥-贝球铁性能影响因素初探
22. A Study on D-type Graphite Grey Cast Iron with Lower Chromium Alloying Element for Making Glass Mold
    玻璃模具用低铬D型石墨灰铸铁的研究
23. The Research on Thin Wall As cast Ferritic Ductile Iron Casting Produced In Metal Mold
    利用余热生产金属型薄壁铁素体球铁件的研究
24. Cause of Crack in Cast Iron Mold and its Solution
    铸铁模具产生裂纹的原因及解决办法
25. The medium chromium white cast iron has been pouring by green sand mold, and the effect of Cr? Si? Mn?
    应用湿砂铸型浇注中低铬白口铸铁，采用正交试验研究Cr、Si、Mn、Cu对铸态中低铬白口铸铁力学性能的影响。
26. Low Chromium Vanadium Titanium Cast Iron by Iron Mold Trial Manufacturing and Application
    低铬钒钛铸铁铁型的试制及应用
27. The CB wash can be used to produce as-cast centrifugal ductile iron pipes by heated mold method.
    并可用于热模法铸态离心球铁管的生产。
28. The Effect of Boron Surface Alloying on the Service Life of Grey Cast Iron Ingot Mold
    铸渗硼对灰铸铁钢锭模寿命的影响
29. Technology of Surface Layer Graphite Nodularizing of Gray Iron Casting with RE-Based Mold Coating
    用稀土基涂料实现灰铁件表面层石墨球化工艺的研究
30. The Analysis of the Thermal Fatigue of Grey Cast Iron Permanent Mold for Centrifugal Cast Iron Pipe
    离心铸铁管用灰铸铁金属型热疲劳性能的研究

noun

1. a spot caused the staining with rust or ink

   Synonym:    iron mould